Innovative Products and Services for the Anticorrosive Coating Industry

PolyHotCote® (PHC) A, developed by IBIX Srl - Tecno Supply Division, has been specifically designed to provide a tough long lasting, flame sprayed coating on outdoor structures made of mild steel, galvanised steel and aluminium, wood, concrete, etc.

It is virtually applicable in any weather conditions and ready for use within minutes of application. PHC A provides coatings resistant to corrosion and abrasion and whose life expectancy is much longer than most of traditional protective coatings.

Key Features and Benefits

  • Resistance to UV rays, salt and sea water;
  • Chemical Resistance;
  • Excellent impact and sand abrasion resistance;
  • Single-coat application with no over-spray damages;
  • Resistant to cracking, chipping and flaking;
  • Low temperature performance to -70°C;
  • Excellent adhesion;
  • No requirement for a primer;
  • Approvals for contact with food and drinking water;
  • Free of Bis-phenol A (BPA), PVC, halogens, phthalates and heavy metals;
  • Low toxicity index and combustion fumes in smoke;
  • Environmentally safe.

Download pdf PHC-A Technical Data Sheet (379 KB)  and the  pdf Comparison of PHC-A with alternative materials (317 KB) document for further information.

Fields of Application

PHC A is used in a wide range of different applications, such as: fencing, street furniture, constructions, automotive parts, stadium seat frames, rail station seating, wirework items, etc.

Application Methods

PHC A has been specifically developed to be applied through the Flame Spray Application method using special flame spray applicators manufactured by IBIX Srl - Tecno Supply Division such as:


PHC A is available in a range of colours of which the closest RAL colours are: 1015, 1021, 5017, 7035, 7046, 3009, 9005, 3020, 6005, 5015, 7001, 7016, 8017 and 9016.

See the PHC A  pdf colour card (1.46 MB)  (colour on your computer screen may not be representative of the true colour). These colours are always in stock.

IBIX Srl can offer any custom colours to match your needs.


PHC AH provides tougher coatings with all the advantages of PHC A. It is ideal for coating large metal items that retain latent heat for longer and should be used for coatings thicker than 1000 microns.

For more information, download  pdf PHC AH Datasheet (450 KB) .


You can join our promotions or request product information or technical support to start up your projects.

Powered by ChronoForms -