INNER ROTATIONAL LINING EQUIPMENT FOR FIRE EXTINGUISHER CYLINDERS

• VERSATILITY - COVERS A BROAD RANGE OF CYLINDER TYPES
• BURNERS - INDIVIDUAL BURNERS FOR LOCALIZED
  HEAT APPLICATION
• TAILSTOCK SYSTEM - QUICK CYLIDER LOADING
  AND UNLOADING
• SAFETY - TOTAL SAFETY SYSTEMS- PHOTOCELL BARRIER
  CONTROLLED ACCESS

RotoCoat 2H has been designed to apply a thermoplastic protective lining, namely Plascoat PPA665 range of thermoplastic coating powders, to carbon steel fire extinguisher cylinders.

Cylinder rotation ensures homogeneous cylinder surface heating and, during the lining phase, allows even powder distribution inside the cylinder itself.

PRE-HEATING
Pre-heating and melting are carried out by means of two burner systems installed on the rear part of the machine body.

Burner Systems
Each burner system consists of one main side burner, one top burner and one bottom burner. The position of the burners can be changed according to the type of cylinder to coat, thus ensuring the best cylinder pre-heating conditions as it will be possible to adjust the heating capacity to the different types of cylinders.

• Metal thickness
• Ring-nut type
• Dimensions

PLC MANAGEMENT
Machine parameter (processing parameter) management is done by a PLC.

Control Panel:
The following time and speed settings are available on the control panel:

• Pre-heat Time
• Lining Time
• Cure Time
• Cooling Time
• Total Cycle Time
• Cylinder Rotation Speed
• Cylinder Tilting Speed

Any other data (piece count, trouble shooting etc.) can be programmed in the PLC Software.

For further information contact
Tecnosupply Division of Ibix Srl
Tel 0545 994589 Fax 0545 994567
Email bruner@tecnosupply.com