SALUTRON
Non-destructive thickness gauge for coatings on ferrous and non-ferrous substrates.

ComBi-D3® is a non-destructive thickness gauge used to measure the thickness of coatings on ferrous and non-ferrous substrates. The thickness gauge allows the operator to perform the necessary calibrations by means of a menu – in this way, changes can be made quickly and easily without mixing up. These features, like many others, make this practical, handy and pocket-sized instrument an essential tool in quality control tests and other applications requiring ease of use and quick measurements with faultless accuracy.

ComBi-D3® measures all non-magnetic coatings such as synthetics, paints, enamels, copper, chromium, zinc, etc. on steel or iron, as well as all insulating coatings such as paints, synthetics, enamels, paper, glass, rubber, etc. on copper, aluminium or brass.

Easy to use – just place it on the substrate and read the result
Wide measuring range – 0 to 3.5 mm
High accuracy
Various kinds of measurements – point by point or continuous
The measurement is not affected by vibrations
Resistant to wear and tear
The measuring result can be displayed in µm/mm or mils
The instrument can be switched on/off automatically or manually
Visual alarm if the coating thickness exceeds the maximum limit
Integrated probe – for single-hand use
Easy setting – follow the menu instructions
No need for periodical calibrations for the various materials
The V groove is useful for positioning the probe on round surfaces (e.g. bars, pipes, etc.)
Delivered with a case including zero plates, a 9V alkaline battery and the instruction manual

Opzioni (Plus-Version):
RS232 connection
Memory for storing 8,192 records that can be divided into max. 999 data sections
Software (WIN95/98, XP, 2000, NT) with statistical functions and transfer cable to the PC
DPU414-30B mini printer for immediate printout on site